Free notification Paid/Premium flash file, schematic, frp lock unlock files, emmc change file JOIN

UFI Box Setup All Version Download (Latest v1.6.0.2334)

Download Ufi box setup files to make EMMC ic replacement, repair and flashing, and unlocking mobile software very easy. The UFI setup file contains these 4 programs which are: 1. UFI Android Toolbox 2. UFI EMMC Toolbox 3. UFI CHIP Prog 4. UFI-UFS Prog.

Latest UFI BOX Setup

How to Install UFI box setup V1.6.0.2334 New Update

UFI Software version 1.6.0.2334 Updates

General changes:
BUGFIX: Revised Dark Mode UI support
BUGFIX: Minor bugfixes and improvements

eMMC ToolBox changes:
ADD: Special Task in Programming Tab
– Update eMMC5x Firmware
Standardized Firmware update method for eMMC 5.x
– Secure Wipe(TRIM, Sanitize)
– [moviNAND] eMMC Full Reset (Reset RPMB, ECC error, Factory Reset)
– [moviNAND] Force boot mode (erase firmware)
ADD: BOOT_SIZE entry on EMMC PARTITIONING tab (For Micron eMMC)
BUGFIX: Revised eMMC Fw routine
BUGFIX: Minor bugfixes and improvements

UFS ToolBox changes:
Requires UFI UFS-PROG with firmware version 01.34

Basic features:
To work with UFS ToolBox, UFI Box is required for security
UFS ToolBox license for UFI Box need to be activated once
Activation process requires UFI UFS-PROG to be connected together with UFI Box
Support LS(PWM Gear 1-4) and HS Gear 1-3B
Currently support up-to UFS2.2
Direct(ISP) method work in PWM Gear 1-4
Support for UFS CONFIGURATION (Provisioning)
Basic Wipe, Erase, Read and Write LUN and user partition
ADD: UFS ToolBox activation routine
ADD: UFI UFS-PROG Firmware update routine
ADD: Special Task (Partially implemented)
ADD: Raw LUN and User partition function implemented in PROGRAMMING tab
ADD: FACTORY IMAGE functions revised to work with UFS device
BUGFIX: Activation issue fixed

Android ToolBox changes:
ADD: Recent model selection
ADD: Model list sort improved
BUGFIX: MediaTek bootrom connect issue fixed
BUGFIX: Improved bypass security routine for MediaTek
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.6.0.2202 updates

General changes:
ADD: Compatibility support for Windows 11 (Build 22000.120) 21H2(Preview)
ADD: Dark mode UI support (Check “Theme” in Settings)
BUGFIX: Improved preloader parse Storage Id routine
BUGFIX: Minor bugfixes and improvements

eMMC ToolBox changes:
ADD: New SAMSUNG moviNAND Firmware update support
New FFU for eMMC:
KM3H6001CA-B515 @ BGA254
KM3H6001CM-B515 @ BGA254
KM3V6001CM-B705 @ BGA254
KMDD60018M-B320 @ BGA254
KMDH6001DA-B422 @ BGA254
KMDH6001DM-B422 @ BGA254
KMDP60018M_B425 @ BGA254
KMDP6001DA-B425 @ BGA254
KMDX60018M-B425 @ BGA254
KMDV6001DM-B620 @ BGA254
KMF310002M-B305 @ BGA221
KMF5X0005C-B211 @ BGA221
KMF720012M-B214 @ BGA221
KMF820012M-B305 @ BGA221
KMF820012M-B305 @ BGA221
KMFE10012M-B214 @ BGA221
KMFE60012M-B214 @ BGA221
KMFJ20005A-B213 @ BGA221
KMFJ20007M-B214 @ BGA221
KMFN10012M-B214 @ BGA221
KMFN10012M-B214 @ BGA221
KMFN60012M-B214 @ BGA221
KMFNX0012M-B214 @ BGA221
KMGD6001BM-B421 @ BGA221
KMGX6001BM-B514 @ BGA221
KMQ31000SM-B417 @ BGA221
KMQ310013M-B419 @ BGA221
KMQ72000SM-B316 @ BGA221
KMQ820013M-B419 @ BGA221
KMQ8X000SA-B414 @ BGA221
KMQD60013M-B318 @ BGA221
KMQD60013M-B318 @ BGA221
KMQE10013M-B318 @ BGA221
KMQE10013M-B318 @ BGA221
KMQE60006M-B318 @ BGA221
KMQE60006M-B318 @ BGA221
KMQE60013M-B318 @ BGA221
KMQN10006B-B318 @ BGA221
KMQN10006M-B318 @ BGA221
KMQN1000SM-B316 @ BGA221
KMQNW000SM-B316 @ BGA221
KMQX10013M-B419 @ BGA221
KMQX10013M-B419 @ BGA221
KMR21000BM-B809 @ BGA221
KMR31000BA-B614 @ BGA221
KMR4Z0001A-B803 @ BGA221
KMR7X0001M-B511 @ BGA221
KMR820001M-B609 @ BGA221
KMR8X0001M-B608 @ BGA221
KMRC1000BM-B809 @ BGA221
KMRC10014M-B809 @ BGA221
KMRD60014M-B512 @ BGA221
KMRE1000BM-B512 @ BGA221
KMRH60014A-B614 @ BGA221
KMRP60014M-B614 @ BGA221
KMRX1000BM-B614 @ BGA221
KMRX1000BM-B614 @ BGA221
KMRX10014M-B614 @ BGA221
KMRX10014M-B614 @ BGA221
KMRX60014M-B614 @ BGA221
KMRX60014M-B614 @ BGA221
KLM8G1GEAC-B031 @ BGA153
KLM8G1GEND-B031 @ BGA169
KLM8G1GETF-B041 @ BGA153
KLMAG1JENB-B041 @ BGA153
KLMAG2GE2A-A002 @ BGA169
KLMAG2GEAC-B031 @ BGA153
KLMAG2GEND-B031 @ BGA153
KLMAG2WEPD-B031 @ BGA153
KLMAG2WEPD-B031 @ BGA153
KLMAG4FEJA-A001 @ BGA169
KLMAG4FEJA-A002 @ BGA169
KLMBG2JENB-B041 @ BGA153
KLMBG2JETD-B041 @ BGA153
KLMBG4GEAC-B031 @ BGA153
KLMBG4GEND-B031 @ BGA153
KLMBG4WE4A-A001 @ BGA169
KLMBG4WEBC-B031 @ BGA153
KLMBG8FE4B-B001 @ BGA169
KLMCG4JENB-B041 @ BGA153
KLMCG4JETD-B041 @ BGA153
KLMCG8GEAC-B001 @ BGA153
KLMCG8GEND-B031 @ BGA153
KLMDG4UCTA-B041 @ BGA153
KMJ5X000WM-B413 @ BGA153
KMK8X000VM-B412 @ BGA162
Read eMMC Fw
Read firmware dump from eMMC, generated file can be used directly or shared among UFI users
BUGFIX: Improved Update eMMC Fw routine
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.5.0.2016 updates

General changes:
ADD: Detection for UFS or eMMC CID when loading preloader
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Bypass security in META mode for MediaTek devices
ADD: Generate scatter V2 for device with UFS storage
BUGFIX: Improved bypass security routine
BUGFIX: QCN Read and Write issue fixed
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.5.0.2008 updates

UFS ToolBox release preview:
The UFS ToolBox requires a UFI UFS-PROG device and will later be available as an upgrade kit for current users
UFS-PROG hardware must be paired with UFI-BOX, so you still need UFI-BOX to work with the software

General changes:
ADD: Support for Android 10 with dynamic partitions so the system information for Android 10 should be read correctly now

eMMC ToolBox changes:
ADD: RPMB provision information on identify
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Bypass security for MediaTek devices
Supported chipset:
MT6785, MT6765, MT6761, MT6763, MT6768, MT6771, MT6779, MT6755, MT6750, MT6757, MT6758, MT6735, MT6737, MT6739, MT6797, MT6799
MT8163, MT8173, MT8695
MT6877, MT6833, MT6893, MT6853, MT6885, MT6873
This function should work for all brands including Xiaomi, Oppo, Vivo, Meizu devices
Some of these chipsets has been tested and some not, please report if you experience any issues with a specific chipset
This feature works standalone and FREE but will only work if you have at least 1 UFI credit in your account
ADD: Added MediaTek BROM version 7.2045.2.0
ADD: Added flashing support for latest Xiaomi models (Redmi Note 9T, Mi 10T/Pro, Mi 11, POCO Series)
BUGFIX: Improved flashing routine
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.5.0.1828 updates

General changes:
Application synchronization routine improved

eMMC ToolBox changes:
ADD: Added Bypass Screen Lock Keyguard in Special Task
ADD: Added Disable Mi Cloud Service in Special Task
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Added Bypass Screen Lock Keyguard in Special Task
Disabling keyguard.apk by patching system on-the-fly for QC in EDL mode and MTK(old models)
ADD: Added Disable Mi Cloud Service
Disabling Mi Cloud related apks by patching system on-the-fly for QC in EDL mode and MTK(old models)
ADD: To avoid further problems, spesific menues in Special Task are now disabled for devices with Bootloader Authorization
ADD: Check Find Device status in Remote Service
ADD: EDL flashing support for certain LG devices
ADD: EDL flashing support for certain Samsung devices
BUGFIX: Improved flashing authorization routine
BUGFIX: Minor bugfixes and improvements

NOTE:
Bootloader Authorization is now free for certain Xiaomi devices
Bootloader Authorization service is limited as “Bootloader Authorization” which is required for Identify, Flashing, Read, Write, Erase and Special Task menu
If Bootloader Authorization request fails, you may retry 2 more times at no cost
There is no refund if you have used 3 times retry and hardware related problems
For any issue and refund claim because of software bugs, you may write an email to support[at]ufibox.com, please include your detailed logs


UFI Software version 1.4.0.1818 updates

General changes:
Support for Windows 10 version 2004(20H1) and 2009(20H2)

eMMC ToolBox changes:
ADD: Introduced console mode by executing UFI.exe with command line /c
Syntax: ufi.exe /c [device] [configs] [command] [options] [file]
BUGFIX: Mediatek scatter(factory image) addressing issue introduced by previous release is now fixed
BUGFIX: User partition list was not loaded after identify bug in build 1780 is now fixed
BUGFIX: Improved PIT programming routine for factory image
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Added MediaTek BROM version 7.1922.6.0, 7.1952.2.0 and 7.2021.1.0
ADD: Added flashing support for latest Xiaomi models (Redmi Note 9, Redmi 10X, Redmi 9)
ADD: Region selection for Xiaomi devices
ADD: Oppo Disable OTA update in ADB tab, Special Task
ADD: Improved flashing support with latest MediaTek BROM for both UFS and eMMC storage
ADD: Updated mediatek soc list: MT6768, MT6873
ADD: Updated qualcomm soc list: SM4250, SM6115, SM6125, SM6150, SM8150, SM8250
ADD: Extract support for latest (Realme) OFP files
ADD: Clear FRP workaround for new models (device with verified boot enabled)
Require to load official firmware package before identify
ADD: Firehose validation routine before flashing
BUGFIX: Improved mediatek flashing routine
BUGFIX: Partition list was not loaded on Qualcomm EDL identify in build 1782 is now fixed
BUGFIX: Xiaomi Mediatek authorized flashing bug in build 1779 is now fixed
BUGFIX: Parsing rawprogram_unsparse with UFS storage
BUGFIX: Fixed EDL flashing issue for some type of firmwares (sparse parsing issue)
BUGFIX: Fixed EDL flashing read partition table issue on build 1801
BUGFIX: OFP extract issue for old QC device
BUGFIX: Invalid flash config problems while identify
BUGFIX: Improved flashing authorization routine
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.4.0.1668 updates

eMMC ToolBox changes:
ADD: Samsung Lz4 firmware support on factory image tab
BUGFIX: Mediatek repartitioning issue fixed on factory image tab
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Added Latest MediaTek BROM version 7.1945.3.0
ADD: Revised Xiaomi flashing authorization routine
Added support for MT6785
Note that flashing authorization is only for devices with the “Find My Device” status OFF
ADD: Revised Nokia flashing authorization routine
Option to preserve service bootloader on flashing
BUGFIX: Mediatek write command issue with latest brom
BUGFIX: Improved NOKIA_UBL task routine
BUGFIX: Scatter loading issue with old brom version
BUGFIX: QCN features was broken on build 1664
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.4.0.1502 updates

eMMC ToolBox changes:
ADD: Added 16MB & 32MB preset for Boot and RPMB size change
ADD: [Vivo] MasterClear in USERAREA PART tab, Special Task
ADD: [Oppo] MasterClear in USERAREA PART tab, Special Task
ADD: New eMMC5x FFU files for eMMC5x Field Firmware Update
MICRON-S0J9K9(16).ffu
SAMSUNG-3H6CAB(210).ffu
SAMSUNG-DH6DAB(210).ffu
SAMSUNG-GD6BMB(5).ffu
BUGFIX: UFI Lite connection issue
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Xiaomi MI Assistant(recovery) Task in ADB tab, Special Task
Wipe data & storage
Format data
Format storage
Format data & storage
Enable MTP
Disable MTP
ADD: [Vivo] MasterClear for Qualcomm and MediaTek, Special Task
ADD: Oppo EngineeringMode Task in ADB tab, Special Task
ADD: [Oppo] MasterClear for Qualcomm and MediaTek, Special Task
Wipe Data & App Data – Remove user lock, FRP and thirdparty app
Wipe Data Only – Remove user lock
Wipe App Data Only – Remove FRP and thirdparty app
Format Data – Format all user data
ADD: External Loader selection list for Qualcomm firehose and MediaTek DA and auth (Click on the label)
BUGFIX: MediaTek keep in DA mode issue fixed
BUGFIX: Auth spesific routine improved
BUGFIX: Nokia Fastboot flashing issue for (Qualcomm platform) with security version 4 + oem-dmverity
BUGFIX: Oppo MediaTek flashing issue with error S_PRELOADER_INVALID
BUGFIX: MediaTek flashing issue with error S_FTHND_FILE_IS_NOT_LOADED_YET
BUGFIX: Oppo EDL flashing with VIP issue


UFI Software version 1.4.0.1466 updates

General changes:
Introducing UFIBox firmware version 1.13
Latest firmware for supported models (Nokia, Meizu, Xiaomi, Oppo, Vivo and others) was uploaded to support servers
Remapped [USB] Device Manager toolbox menu
Revised upgrade firmware routine for boxed with new hardware version

eMMC ToolBox changes:
ADD: Improved reading system information for Android with Project Treble and Android A/B system
BUGFIX: Handing extracted OFP files
WARNING: Extracted OFP firmwares is still encrypted and can only be used from within the UFI Software(including eMMC ToolBox)
Always use self extracted firmware image from OFP file, never use firmware extracts downloaded from internet that are known to have been extracted using UFI software
Using this fimware with other tools may result in bricked devices !!!
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Introducing UFI CREDIT for flash authentication, unlock bootloader and repair signed imei for new security phones
Currently implemented:
Nokia (by HMD Global) supports for flashing(QC, MTK), repair imei, unlock bootloader
Meizu supports for flashing(QC, MTK, EXYNOS), unlock bootloader(EXYNOS)
Xiaomi supports for flashing(QC, MTK), unlock bootloader for some devices
Oppo supports for flashing(QC) and repair imei(QC, MTK)
ADD: Full support for Nokia phones (HMD Global)
– Support for phones with old security and new security version: 4 and security version: 8
– Normal flashing via Fastboot mode (both for old and newer phones, requires authentication)
– Unlock Bootloader via “FASTBOOT->Special Task” (requires credits)
– Repair IMEI via “SERVICE->IMEI & PROD ID”, need to run in FTM MODE before IMEI tasks(requires authentication)
ADD: Support for Meizu with Exynos platform
– Normal flashing via Fastboot mode(requires authentication)
– Unlock Bootloader via “FASTBOOT->Special Task” (requires credits)
ADD: Support for Latest Oppo phones(Qualcomm platform)
– Normal flashing via Qualcomm EDL mode (requires authentication)
ADD: Full support for Latest Xiaomi phones(Qualcomm and MediaTek platform)
– Normal flashing via Qualcomm EDL mode and MTK BootRom mode(requires authentication)
– Unlock Bootloader for some phones via “FASTBOOT->Special Task”
ADD: IMEI repair support for Newer Oppo phones
– IMEI repair for Oppo requires to have a pair of PCBA Number and Both IMEI number(requires credits)
ADD: Erase FRP and Erase Userdata option while flashing
For effective flashing task, you can now automated Erase FRP and/or Userdata on flashing
ADD: On MediaTek devices, After Identify phones will stay in DA mode so next time you need to do –
some tasks(Write, Erase, Special Task, etc) the software will resume the DA session and continue the task
Note that: DA session will lost if USB disconnected, changing BROM version or you close the UFI software
ADD: Erase FRP and Userdata support with Newer Vivo phones with new security
ADD: Merged IMEI and Product ID functions to “SERVICE->IMEI & PROD ID” tab
ADD: “SERVICE->TOOLS” tab
[Oppo] Secrecy Unlock used to Decrypt Factory Engineering Mode, after unlock you can Unlock Region Lock, Enable DIAG or META mode
[META] Master Clear used to Erase Internal Storage (may work for some old models)
ADD: “SERVICE->REMOTE SERVICE” tab
All Remote Services will be available here(some services can be free or requires credits)
Currently available:
Xiaomi Unbind Mi Account(CLEAN Device Only) by SN
Oppo Calculate AuthTokenDecrypt Code, Similliar to Secrecy Unlock but it done remotely without access to the phone physically
ADD: Added Latest MediaTek BROM version 7.1917.3.0 for latest MediaTek chipset with new PL signature type
BUGFIX: Improved rawprogram.xml parsing to handle misconfigured items for unsplited/sparsed images(vivo)
BUGFIX: Improved ADB Logcat features
BUGFIX: Improved Debug Uart Terminal features (Note that Debug Uart for MediaTek platform requires 921600 baudrate)
BUGFIX: Cancels at Credit confirmation for MediaTek platform was ignored
BUGFIX: Minor bugfixes and improvements

NOTE:
All features which requires authentication will require credit
Some remote services are free but are required to have atleast 1 credits in your account
See “[ACCOUNT]” menu to see latest available services, status and the service cost
The credits top up system can be accessed directly there
Payment can be made with Paypal(for International) and GO-PAY(For Indonesia)
Credits can also be purchased from available resellers


UFI Software version 1.3.0.1156 updates

General changes:
Software version numbering changed
ADD: Extract support for RAR5 file format
ADD: System information for Android A/B system is now readed correctly
ADD: Improved reading system information for Android Oreo and Project Treble system

eMMC ToolBox changes:
ADD: eMMC5x Field Firmware Update support
This Field Firmware Update (FFU) is a standart feature introduced to eMMC 5.0 or later
FFU on eMMC5x is slighly different compared to movinand custom ffu, it will not erase data or reset eMMC config.
FFU available via sync:
HYNIX-hB8aP(3).ffu
HYNIX-hDEaP3(2).ffu
MICRON-S0J9D8(167).ffu
MICRON-S0J9F8(16).ffu
SAMSUNG-QE63MB(3).ffu
ADD: Auto list PIT file inside tar.md5 archive on factory image tab
BUGFIX: Minor bugfixes and improvements
BUGFIX: MoviNAND update eMMC firmware was broken on build 1155

Android ToolBox changes:
ADD: Meizu Qualcomm EDL with authorization flashing support
Currently supported models:
Meizu 15
Meizu 15 LITE
Meizu 16th
Meizu 16X
Internet connection required for remote authentication
ADD: Xiaomi Anti-Rollback repair via EDL
Note that newer Xiaomi devices require more authentication(Qualcomm and MediaTek model)
Some models has a bug which allow us to use “older” firehose without custom auth and some others had a bug to bypass custom auth.
Currently supported models:
Redmi Note 5, Mi 6X (SDM660)
Redmi S2/Y2, Mi MAX3 (MSM8953)
ADD: Revised Xiaomi Reset Mi Account Lock routine to support Oreo based MIUI
ADD: Qualcomm EDL Special tasks
Patch boot image(disable dm-verity, encryption) – oem sig
Patch boot image(disable dm-verity, encryption) – sig overflow
Switch to Global for Oreo based MIUI
ADD: Xiaomi sideload(MIUI Recovery) support, use the toggle button to switch between normal and MIUI sideload
ADD: Xiaomi Wipe data via MIUI recovery
ADD: Removed fastboot quick task, changed to fastboot special task
ADD: Motorola fastboot flashing support(correct parsing for xml file)
ADD: Motorola Bypass FRP Lock in the fastboot special task menu
ADD: USB connection status which will be usefull to identify problem caused by usb communication while flashing
ADD: Bypass FRP Lock(Bypass setup wizard) in the adb special task menu
ADD: Disable MIUI Service for non rooted devices in the adb special task menu
ADD: Extract support for newest OFP files
BUGFIX: QCN write bug fixed
BUGFIX: EDL flashing issue on old chipset
BUGFIX: EDL flashing issue with some Oppo devices with VIP enabled bug fixed
BUGFIX: Mediatek BROM version auto selection on older chipset
BUGFIX: Spreadtrum fdl load handler when working with PAC files directly(without extract)
BUGFIX: Bug while listing provisioning file resulting duplicate files
BUGFIX: Bug while listing multi(lun) rawprogram for devices with ufs storage
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.2.0.455 updates

General changes:
Added “report an issue” in the window popup menu
Fixed UFI Dongle detection bug in Windows 8.1 Build 9600
Improved support for Windows 10 Redstone

eMMC ToolBox changes:
BUGFIX: Bugfixed factory image load was broken on build 454
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Bug fixed for Mediatek BROM version 7.1817.3.0(was problematic for device with eMMC storage)
ADD: Mediatek META init support for latest MediaTek chipset(MT6783, MT6771)
ADD: Flashing Support for Spreadtrum Devices directly with pac file(without extract)
ADD: Revised Qualcomm EDL flashing(handling sparse file on-the-fly)
ADD: Internal firehose loader for some “new” Vivo devices to bypass custom auth
ADD: Identification of Qualcomm firehose loader with VIP and custom auth
ADD: Flashing Support for Qualcomm firehose loader with VIP enabled (Latest Oppo devices, R11s, R15, A71 2018 and so on)
Partial Read, Write and Erase is blocked with firehose with VIP enabled
ADD: Extract support for latest ofp files (F7, R11s, R15 and so on)
ADD: “Clear App Cache” on Settings
ADD: Option to exclude spesific ports on Settings
BUGFIX: Qcn write was broken on build 454
BUGFIX: Meizu SLA auth for latest MediaTek models
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.2.0.448 updates

General changes:
Introducing UFIBox firmware version 1.12 (CHIP prog bugfix)
Introducing [USB] Device Manager toolbox menu
Fixed virtualization bug in Windows 10 Build 16299

Support changes:
Over 7.0TB compressed files uploaded to the support servers
intenal download manager improvements

eMMC ToolBox changes:
ADD: Option to resize filesystem when resizing userdata
Use this on “non-empty” userdata, It will resize filesystem on-the-fly according to userdata partition size without losing users data
ADD: Spreadtrum support on factory image tab
Input file is “BMAConfig” file (SCXXXX.xml), can be found on the extracted pac file
BUGFIX: EXT_CSD with repartitioning write bug fixed
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
ADD: Spreadtrum flashing and imei repair support
Spreadtrum device with eMMC storage is now supported for flashing, partial read, erase and write from the flash tab
Introduced in special task menu:
Factory reset, Backup and Restore NV, Clear FRP Lock
Identify or flashing spreadtrum devices requires “BMAConfig”, fdl1 and fdl2 files which is part of the official firmware package(PAC, P5C or CPB file)
ADD: Extract support for CPB file version 2.0, 2.1
ADD: Revised Xiaomi Reset Mi Account Lock task
Mostly support all Xiaomi devices on the market including MiUI 9 with Android 7.2 or later
Reset Mi Account Lock task will disable secure system service so Mi Cloud service will be completely disabled after operation
Restoring firmware via flashing or OTA will re-enable the system service so device will be re-locked when internet connection enabled
ADD: Oppo secure imei repair support
Newer oppo devices come with secure(signed) imei
Currently supported device for now: Oppo A71
Before write imei, you have to patch secure imei from the flash tab, Special Task menu
ADD: Added latest BROM version 7.1817.3.0 for latest MediaTek chipset(MT6783, MT6771) support
For some models, you may have to select correct DA file manually
ADD: Added support for Qualcomm SDM630, SDM636, SDM640, SDM660, SDM670, SDM845 devices
ADD: Support for Nokia devices (Qualcomm and MediaTek) with official nb0 firmware files
ADD: Extract support for Nb0 file
ADD: Cache handling on model loads
WARNING: Do not rename “BRAND” and “MODEL” list to be different as at support site, certain features might not working properly !!!
BUGFIX: Fixed bug on MediaTek identify causing hang on some models
BUGFIX: Fixed bug on firehose auto selection
BUGFIX: Minor bugfixes and improvements

CHIP Prog changes:
BUGFIX: Fixed write bug on small SPI NAND and eeprom devices(UFIBox firmware upgrade required)
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.2.0.429 updates

General changes:
ADD: UFI Box “BLACK” Indonesia version Upgrade CID support(paid)
The UFI Box “BLACK” was intended to be sold only in Indonesia, however we found many of them were sold outside the country
By upgrading CID to International version, you will have full access to all services including card refill and support download
ADD: Show [USB] Device Manager on Settings popup
This is custom Device Manager with “Restart, Remove, Enable, Disable” features
Come with custom “Install Drivers” for ADB, Fastboot, Qualcomm 9008, Qualcomm Diagnostic Port, MediaTek USB Port and soon
No more headache to search “universal drivers” anymore
ADD: Show [USB] Device Manager(inc not-present device) on Settings popup
This is custom Device Manager that will also list all non-present installed USB drivers
Come with custom “Uninstall Drivers”
Usefull to remove/uninstall obselete drivers without headache
Screenshot shortkey is now “CTRL + SHIFT + ALT + C”
Forced menues shortkey is “CTRL + SHIFT + F”

Support changes:
ADD: Over 6.4TB compressed files uploaded to the support servers
ADD: Revised intenal download manager user interface
ADD: The file list is now sorted by date (newer file listed above)
ADD: User bandwidth information is now updated realtime
ADD: Auto download new support file definitions on software load

eMMC ToolBox changes:
ADD: Added info.txt log on read as user request
ADD: Added Pattern Lock decoder(if any) on Identify as user request
ADD: Added Sony ftf file support for read and write on Factory Image Tab
ADD: Added firmware verification on “Update eMMC Fw”
ADD: Insertion test pin scanning is now mapped to single bga package(BGA153,BGA162,BGA221,BGA254,BGA529)
ADD: Auto adjust partition size on EXT_CSD write with partitioning
ADD: Individual EXT_CSD write on EXD_CSD viewer (Advance User only)
ADD: eMMC type definition updated
ADD: New TP picture for some BGA221 devices
ADD: Added FFU file for KMQ7X000SA-B315(1)
BUGFIX: eMMC firmware update routine, some problematic issue after software build 371 should be okay by now

Android ToolBox changes:
ADD: Phone type definition updated
ADD: Added Pattern Lock decoder(if any) on Identify as user request
ADD: Extract support for CPB file version 1.8, 1.9
ADD: Extract support for PAC, P5C file
ADD: Revised file definition loading routine to speed-up software loading
ADD: Revised Reset Mi Account Lock
No more erase persist, so you should flash the default persist partition before the operation
With this method, it is tested to work with MIUI version 8.1 or older
ADD: Remote Mi account status on ADB identify(requires internet connection)
ADD: Non Installed Devices Install shortcut on device scan
ADD: Hardware information such as Storage Id on Model selection(requires internet connection)
ADD: QCN file Remote download is now listed on QCN file popup included alternative(untested) QCN that was not added yet to Support Files
BUGFIX: Improved ADB communication for new devices

[MediaTek tab]
ADD: Support for MediaTek devices with UFS storage
ADD: Meizu SLA Auth support for new devices(M6, PRO7, PRO7 Plus)
ADD: Added New DA to support new Meizu Devices
ADD: Backup And Erase NVRAM on Special Task
ADD: Restore NVRAM from backup on Special Task
ADD: Switch to USB HS option (was always enabled)
ADD: Reboot after flash option
BUGFIX: Minor bugfixes and improvements

[Qualcomm tab]
ADD: partition.xml file creation on Read for devices with UFS storage
ADD: Backup And Erase NV,Efs on Special Task
ADD: Restore NV,Efs from backup on Special Task
BUGFIX: Oppo Qualcomm OFP extraction bug fixed(again)
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.2.0.419 updates

Support changes:

ADD: Over 5.4TB compressed files uploaded to the support servers
ADD: Revised support files core system
ADD: Revised built-in download manager with resume and queue support
ADD: Download limitation on each users(10 GiB or 20 files a day)

eMMC ToolBox changes:

ADD: Verify for User Partition
Used to verify data from the specific partition of eMMC againts data from file
ADD: Sector 0 read and write Nand Test before random
BUGFIX: PIT file handling bug fixed on Factory image tab
BUGFIX: Workaround for FFU causing eMMC dead to moviNAND with controller VHX0(KMVTU)
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:

ADD: Disable MI Cloud Services
This function will patch firmware version 8.0 and below(on the fly) while flashing
Works on both Qualcomm and MediaTek platform
BUGFIX: UFI Box and UFI Dongle can now work simultaneously
BUGFIX: Minor bugfixes and improvements

[MediaTek tab]
ADD: Meizu SLA Auth support
Meizu Mediatek Devices will work just like other Mediatek Devices in general(requires internet connection)
ADD: Automated [Coolpad] Exit Factory Mode on flashing procedure

[Qualcomm tab]
ADD: Support for Official LGE TOT Firmware extraction
ADD: Automated General CDT handling for Other Qualcomm devices(Lenovo) on firehose flashing procedure
BUGFIX: Oppo Qualcomm OFP extraction bug fixed
BUGFIX: Revised DA handling for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
BUGFIX: Revised [Oppo] Exit Fastboot Mode, now it should works on any known firmware variants


UFI Software version 1.2.0.407 updates

eMMC ToolBox changes:

ADD: Auto listing brand from “Android ToolBox” firmware directory on Factory Image tab
ADD: Custom Ext_CSD preset
You may create your own custom EXT_CSD preset file, see example.txt in \UFI\emmc\def\Config
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:

[MediaTek tab]
ADD: Storage type selection
ADD: Bypass security moved to Special Task

[Qualcomm tab]
ADD: UFS provisioning support for Qualcomm based devices
New “blank” UFS memory should be configured so the flashing procedure can be done.
Provisioning task will configure new UFS chip according to device partitions layout.
Provisioning UFS is a irrecoverable ONE time operation so make dure to select correct “xml provisioning file” based on UFS manufacturer
ADD: “Show All Partition” option
ADD: Partial flashing support from userarea binary
ADD: Full erase before flash option
ADD: Firmware and partitions validation when loading rawprogram xml
ADD: Automated [Oppo] Exit Fastboot Mode on firehose flashing procedure
ADD: Support for Official Oppo firmware package (*.ofp)
ADD: .tar.bz2 firmware handling to support official Oppo firmware package

BUGFIX: [Oppo] Exit Fastboot Mode revised, now it should works on any known firmware variants
BUGFIX: Official Oppo firmware package (*.ofp) for Qualcomm Devices
BUGFIX: Fixed DA handling for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
Vivo MT67xx Devices now supported
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.2.0.403 updates

eMMC ToolBox changes:
ADD: Auto listing brand from “Android ToolBox” firmware directory on Factory Image tab
BUGFIX: Minor bugfixes and improvements

Android ToolBox changes:
[MediaTek tab]
ADD: Storage type selection
ADD: Bypass security moved to Special Task
[Qualcomm tab]
ADD: UFS provisioning support for Qualcomm based devices
New “blank” UFS memory should be configured so the flashing procedure can be done.
Provisioning task will configure new UFS chip according to device partitions layout.
Provisioning UFS is a irrecoverable ONE time operation so make dure to select correct “provisioning xml”
ADD: “Show All Partition” option
ADD: Partial flashing support from userarea binary
ADD: Full erase before flash option
ADD: Firmware and partitions validation when loading rawprogram xml
ADD: Automated [Oppo] Exit Fastboot Mode on firehose flashing procedure
ADD: Support for Official Oppo firmware package (*.ofp)
ADD: .tar.bz2 firmware handling to support official Oppo firmware package
BUGFIX: Fixed DA handling for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
BUGFIX: [Oppo] Exit Fastboot Mode revised, now it should works on any known firmware variants
BUGFIX: Minor bugfixes and improvements


UFI Software version 1.2.0.399 updates

Introducing P2P(BitTorrent) support download

  • Built with Aria2, to enable this function you have to allow the firewall to open when you’re prompted to do so
  • To prevent data corruptions, specially to users with limited internet connection, files bigger than 1GB should be downloaded using BitTorrent.
  • Download tasks were cached, so you can resume later (Check “Autosave Unfinished Downloads” in Settings)

Introducing new app module: UFI CHIP Prog

  • Support SPI NOR Flash, SPI EEprom and I2C EEprom chip
  • Support various type of chip with fast and easy user interface
  • Support for Read, Write, Erase, Verify and Blank check as well as BP Unlock function for some SPI Flashes
  • Usefull for BIOS recovery, Router flashing and so on
  • Documentations and Adapter comming soon

Introducing new UFIBOX firmware version 1.10

  • UFI software version 1.2.0.399 requires UFIBOX with fw version 1.10

Support Files changes:

  • Over 3.3TB compressed files uploaded to the support servers
  • Added many popular brands to Android directory
  • Added Schematics, QCN files and USB Drivers

eMMC ToolBox changes:
ADD: Auto retry handling in case of un-successfull “Read” because of chip’s bad block
ADD: Auto set partition config based on firmware selection on Factory Image write.
ADD: SANDISK chip Smart and Health report
BUGFIX: Special Task, Resize function was not handled correctly in some case.
BUGFIX: FFU routine improved, in some rare case ffu might not be performed correctly.

Android ToolBox changes:
ADD: Android SDK Path setting(adb.exe and fastboot.exe path)
ADD: Confirmation dialog before auto extracting firmwares
ADD: Special Task menu on the ADB Tab(removed Tool sub tab)
Most function requires devices to be rooted
This menus were dinamically changed based on the connected phone.
Implemented tasks:
– Clean Viruses
– OEM-Unlock
– [Xiaomi] Disable Mi Cloud
– [Samsung] Exit Factory Mode
ADD: Support for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
– Note that most of Helio SoC was fused during production time so –
some partition might be protected for erase and write, in this case only full erase allowed.
ADD: Special Task (MediaTek Tab) menus for:
– [Oppo] Clear Region Lock
– [Coolpad] Exit Factory Mode
– [ASUS] Disable Demo Live
ADD: Enabled erase function for Qualcomm firehose mode(as many users request)
ADD: Special Task (Qualcomm Tab) menus for:
– Full erase
– Full erase (including boot)
– [Coolpad] Exit Factory Mode
– [Oppo] Exit Fastboot Mode
ADD: “Auto sparse” option on fastboot flashing
Some “system.img” files greater than 2GB may cause fastboot crashes(depend on the fastboot version)
If this option checked, files greater than 2GB will be “sparsed”
BUGFIX: Fastboot detection after reboot bug introduced in version 1.2.0.390
BUGFIX: Workaround for “delayed loading” when opening UFI Android ToolBox


UFI Software version 1.2.0.390 updates

Support Tab changes:
Removed server selection on user side, downloads request will be fully managed by server.

eMMC ToolBox changes:
ADD: Show detailed information when loading files (ROM, EXT_CSD info)
ADD: Show info after writing new EXT_CSD
ADD: LGE Vendor / Platform on Factory Image tab
ADD: Model and Firmware selection for Samsung and LGE on Factory Image tab
ADD: “SD Boot Recovery” option on Factory Image tab using UFI Lite
This will create “SD Boot Recovery” for supported devices (Samsung, LGE and other;-
Qualcomm and Exynos platform only !)
ADD: “Reset Meizu(Flyme Account) Lock” in User Partition, Special Task menu
BUGFIX: Erase single partition bug fixed
BUGFIX: “Verify” bug fixed

Android ToolBox changes:
ADD: Device connection hint and tips
ADD: Phone model is now displayed for ADB device
ADD: Extract support for more LG KDZ files
ADD: Extract support for Coolpad CPB files
ADD: Dynamic Fastboot Quick task menu for
“Clean FRP” for ASUS Qualcomm(X014D)
“Erase NVM” for Intel device
“Enable End User Mode” for ASUS Intel device
“Disable Demo Live” for ASUS device
“Erase NVM and EFS” for Qualcomm device
Note: You have to select correct Brand, Platform and Model to enable the menu
ADD: Flash, Qualcomm tab
Added Firehose mode for device with UFS memory
You can now Identify, Read and Write spesific partitions for device –
that support “Firehose” mode from Emergenty Boot mode(Qualcomm HS-USB QDLoader 9008)
This will be usefull to backup security data(modemst1, modemst2, fsg and other) before further tasks
Featuring 2 Flash methods(“Raw Program” or “Userarea”)
“Raw Program”: Read or Write as Official firmwares
“Userarea”: Read or Write as Raw Dump
Featuring Special Task menu for
“Clean Viruses”
“Factory Reset”
“Patch boot image(insecure boot)”
“Clear User Locks (Code, PIN, Gesture, Fingerprint)”
“Remove Google Account”
“Reset Xiaomi(MI Account) Lock” for Xiaomi device
ADD: “Skip re-partition” on Qualcomm tab
This will skip the write of MBR or PrimaryGPT partition
ADD: “Skip userdata” on Qualcomm tab
This will skip the write of userdata partition
ADD: Flash, MediaTek tab
Added more BROM version
Featuring 3 Flash methods(“Scatter” or “Full flash” or “Userarea”)
“Scatter”: Read or Write as Official firmwares
“Full flash”: Read or Write as Raw Dump including bootloader
“Userarea”: Read or Write as Raw Dump
Added to Special Task menu
“Full erase” to erase all flash
“Full erase(except bootloader)” to erase all flash except bootloader
“Clean Viruses”
“Factory Reset”
“Clear User Locks (Code, PIN, Gesture, Fingerprint)”
“Clear FRP Lock”
“Remove Google Account”
“Reset Meizu(Flyme Account) Lock” for Meizu device
ADD: Service, IMEI tab
Added “Erase NVRAM before write imei” for Mediatek device
Bugfixed write QCN when QPST mode unchecked
Added “RF Band Config” for Qualcomm device
Usefull for:
Identify and fix network problems because of incorrect QCN
Add Spesific RF/LTE Band
Added Read and Write SN, BT Addr and Wifi Mac for Qualcomm device
ADD: ADB tab
Bugfixed ADB dump for device with UFS memory
Sideload and apk drop is now cached, right click to load recent files
Added “Resize Storage” on Tools tab, work with custom recovery mode(TWRP) only
Added “Disable Mi Cloud” on Tools tab, this will disable Mi Cloud services


UFI Software version 1.2.0.371 updates

Support Files changes:

  • Over 2.15TB compressed files uploaded to the support servers
  • Added many popular brands to Android directory
  • Added Schematics, QCN files and USB Drivers

eMMC ToolBox changes:
ADD: “exclude user data” in presets
ADD: “Custom Operations” changed to “Special Task”
ADD: Resize User Part will resize UMS instead of USERDATA on some devices
ADD: Dialog window to select CID on auto write eMMC CID function
BUGFIX: Partition switch routine improved

Android ToolBox changes:
ADD: MediaTek SoC flashing support
AllInOne MediaTek Flashing Tool
Support for almost all MediaTek SoC on the market for both normal(generic) and secure device
Automated DA, auth and cert file selection based on Brand
Featuring an extended and detailed information when identifying a device such as a mobile version,
including information kernel driver (especially useful for devices without after sales support)
Featuring “NAND Test” to help determine the storage integrity of the EMMC
Featuring “Erase”, “Read” and “Write” partitions so you can choose the desired partition as you want
The “Read” function will also produce scatter and modem database file.
Featuring “Special Task”, Works in flash mode to
Clean Viruses
Remove Accounts (Google, Flyme, Mi and others)
Clear User Locks (Code, PIN, Gesture, Fingerprint)
Featuring “Bypass Security field” to bypass code download protection on secured devices
Featuring Extended Flash function with option:
Secure BL (automated the signed files selection for some firmware packages)
Enable DL checksum (calculate and verify checksum at post flashing process)
Erase before flashing (safely erase the defined area in scatter before flashing)
Restore security field only (Restore security field only instead of full flashing, only for device that was bypassed)
Featuring SoC and eMMC CID verification before flashing
ADD: MediaTek SoC imei repair support
Support for almost all MediaTek SoC on the market
Imei repair on MediaTek devices works in META MODE and AT MODE
Automated MODEM and AP database selection based on firmware package
ADD: MediaTek SoC product data repair
Used to rewrite SN, BT Addr and Wifi Mac
Rewrite Wifi Mac used to repair “NVRAM WARNING Err: 0x10”
ADD: “Apps Manager” on ADB tab
Used to manage apps (uninstall, disable or enable apps)
Featuring “Clean Viruses” function (requires root)
ADD: “Tools” on ADB tab
Unlock Bootloader, used to unlock bootloader for some secured devices(for now it is supposedly working for ASUS, Meizu, Lenovo with MediTek SoC)
ADD: Adb File Explorer plug-in
ADD: Automated QCN listing on IMEI tool based by Brand selection
ADD: QPST Mode on Read/Write QCN (QPST must be installed on your system)
ADD: Dual SIM option on Read/Write QCN
ADD: patch0.xml will be generated also on KDZ extraction process
ADD: ASUS Intel Moorefield debrick support for phones with “New eMMC” or “New Soc” for K016(FE380CG), K019(FE375CG)
ADD: ASUS CSC firmware package on support
ADD: “*” button to mark favourite firmware package
BUGFIX: Qualcomm Firehose flashing routine improved


UFI Software version 1.2.0.358 updates

Support Files changes:

  • Over 600 GB compressed files uploaded to the support servers
  • Added US and Indonesia server
  • Users may select prefered server
  • Autosave Unfinished downloads so you can easily resume next time when app loaded(you may disable this from settings)

eMMC ToolBox changes:
ADD: eMMC Directory Structures changed (based by Brand)
Directory migration will be performed once, backup the old data is moved to sub dir “Others”
ADD: NVIDIA tegra partition support
ADD: eMMC product name definition updated
ADD: “+” button in product name selection to add custom (undefined) eMMC product name
ADD: eMMC ISP pictures collected from users
Download UFI_emmc-isp-pictures-pkg.7z and extract to UFI install path (C:\UFI)
ADD: “Remove Google Account” function within’ User Partition tab
ADD: “Remove User Lock” function within’ User Partition tab
ADD: Detailed Health Status for Micron eMMC
ADD: Added 8192KiB option to RPMB size for Change boot size function
BUGFIX: ISP routine improved

Android ToolBox changes:
ADD: ASUS Intel Moorefield debrick support for phones with “New eMMC” or “New Soc” (ZE550ML,ZE551ML,ZX551ML)
ADD: KDZ file support for new LGE phones
Please note that for know it will only work with new KDZ file format for new phones (D295 an soon)
ADD: “BL info” to read the bootloader lock status
ADD: “BL unlock” to unlock bootloader
You may still need to provide correct unlock code for some devices
ADD: “Erase efs before write” option within Imei Tool for Qualcomm platform
This will erase modemst1 and modemst2 before write process, make sure to select “ADB device” instead of Qualcomm Diag
ADD: Qualcomm imei write function improved
BUGFIX: Huawei APP file parsing improved


UFI Software version 1.2.0.352 updates

ADD: FFU file for KMNJS000FM-B205(3),KLM8G2FE3B-B001(14) and KLMBG4GEAC-B001(0) with smartreport support
ADD: Second Support Server, IDM support closed on server side for server stability and to minimize downtime
ADD: Copy files to (internal) sdcard function in AdbTool
ADD: Read Health and Smart report(moviNAND) in AdbTool
ADD: Auto Resume function re-enabled and fixed, usefull when read/dumping data from eMMC with bad sectors
ADD: Shorcut to thirdparty apk root tools from the ‘#’ menu
Download UFI_android-superuser-pkg.7z and extract to UFI install path (C:\UFI)
ADD: Settings for “Always backup EXT_CSD”
ADD: Settings for “[moviNAND] Always Factory Erase before Factory Reset”
BUGFIX: eMMC Initialization improved
BUGFIX: Intel Imei write (switch AT mode failed issue) resolved
BUGFIX: Adb and Fastboot crash issue resolved
BUGFIX: Smartcard detection routine improved
BUGFIX: Update eMMC fw routine improved (VMX0 issue)
BUGFIX: Huawei *.APP files parser fixed
BUGFIX: Fastboot file package parsing issue fixed
BUGFIX: EXT_CSD write issue
BUGFIX: eMMC initialization issue for device with active RST_n_FUNCTION


UFI Software version 1.2.0.341 updates

eMMC ToolBox changes:

ADD: Automated reset partition config and boot bus with factory erase on Factory reset for moviNAND
ADD: eMMC product name definition updated
ADD: eMMC TP pinout definition updated
ADD: FFU files for KMNJS000ZM-B205(3), KMVYL000LM-B503(37), KMVZL000LM-B900(26)
ADD: [User Partition] Reading eMMC User partitions for Qualcomm devices will also generate rawprogram0.xml
The generated dump may be used for Qualcomm debrick function with Android ToolBox, –
but you have to spesify the required loader (Sahara or Firehose) files
BUGFIX: Partition scaning and Resize User Data bugfixes for some devices (Xperia)
BUGFIX: [Factory Image] Writing Qualcomm files may result in invalid MBR generation

Android ToolBox changes:

ADD: Qualcomm Sahara and Firehose flashing routine
Easy repairing dead/hard bricked devices (Qualcomm HS-USH QDLoader 9008)
Flashing bricked qualcomm devices with sahara or firehose protocol
For Sahara, MPRG and msimage will be used and for Firehose emmc_firehose.mbn will be needed
Note that not all Qualcomm Soc supports Firehose protocol
The firmware packages used for Qualcomm flashing is standart QPST files
Factory file package supported in this release: Lenovo *.qsb
Lots of files already uploaded to Support and we still uploading more
ADD: Switch to DLOAD (Qualcomm MMC Storage mode) (Power icon)
ADD: [Flash Tool] Flashing support for ASUS Qualcomm devices (Zenfone Laser)
ADD: [Flash Tool] Flashing support for Huawei devices
ADD: [Flash Tool] Added support for Huawei factory file package (UPDATE.APP)
ADD: [Flash Tool] Added support for Lenovo factory Intel file package *.inb
ADD: [Imei Tool] Read and Write PRL for Qualcomm devices(requires valid SPC for most devices)
ADD: [Imei Tool] Read and Write QCN for Qualcomm devices(requires valid SPC for most devices)
ADD: [Imei Tool] Send PWD (Security Password) for Qualcomm devices
ADD: [Flash Tool] xFSTK version selection that will be used for intel flashing
ADD: [Flash Tool] Add Re-Partitioning only for all intel ASUS devices
ADD: [Flash Tool] Unroot method for Android Intel devices(# menu)
ADD: [Flash Tool] Framaroot root/unroot method (# menu)
ADD: [Flash Tool] Intel auto flashing fastboot handler
Intel flashing will automaticaly continuing to fastboot flashing when MFT file used (flash.xml)
BUGFIX: [Flash Tool] Improved fastboot flashing routine
BUGFIX: [Flash Tool] Improved intel flashing routine
BUGFIX: [Imei Tool] Repair Imei for Qualcomm devices improved
BUGFIX: [Imei Tool] Repair Imei for Intel Devices with Dual Baseband
BUGFIX: [Adb Tool] Superuser access issue on some devices
BUGFIX: [Adb Tool] Storage info detection for some devices
BUGFIX: [Adb Tool] Adb dump stops at 10% bugfixed
BUGFIX: [Adb Tool] Adb dump will now use temporary storage at /data/local/tmp is no internal sd path detected

UFI Software version 1.2.0.337 updates

BUGFIX: Access Violation when more than software instance opened.
BUGFIX: Imei repair may fail during operation when adb if offline in the middle of process.
BUGFIX: Imei repair failures on ASUS device with csc version date 20150918 of later, such as: Zenfone 2 ASUS_Z00A, ASUS_Z008
BUGFIX: Internal and External storage detection
BUGFIX: Fastboot flashing may aborted in the midle of process when some ‘in-correct’ function reported error.
ADD: .tgz firmware handling to support official Xiaomi fastboot file package.
ADD: “Restore to original imei” option for ImeiTool(only for ASUS device), this will attempt to get original imei from server (only for device with burned keybox and have a valid isn and serialno)
ADD: “Downgrade” option for Fastboot FlashTool.

NOTE that most of Android ToolBox function will use adb, and it might fail when there are softwares that will connect to adb also.
SO, please close any other software that using adb when you’re using Android ToolBox.


UFI Software version 1.2.0.335 updates

Android ToolBox Initial Release

Features in this version:

FlashTool

FASTBOOT

  • Universal Android Fastboot flash client
  • Brand and Model based firmware definition
  • Support for Official ASUS .raw and .zip files
  • Backup and Restore Android user data, apk files for before and after flashing
  • Factory reset(erase cache and data ) for Android devices
  • “Factory erase before flash” to clean-up user data
  • “Erase all partitions(blankphone)”, this will erase all userdata partition including factory and config, imei and calibration data will be permanently deleted.
    this should only be used for “empty board”, for example after you replace the eMMC.
  • Included Root script for ASUS Intel devices(‘#’ icon), based on: http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096
    there are 4 fastboot oem triggers available. For newer device usually “T4” will work, but for A400CG please select “T2”.
    INTEL
  • Intel SoC Platform Flasher for bricked devices
    Supported platform: Moorestown, Medfield, Merrifield, Moorefield, CloverView and CloverViewPlus
  • Pre-packaged debrick file(UFI-ASUS_intel_debrick_package.zip) available for the following devices:

ASUS_T00F(A500CG), ASUS_T00J(A501CG)
ASUS_T00G(A600CG), ASUS_Z002(A601CG)
ASUS_T00I(A400CG)
ASUS_T00K(A502CG)
ASUS_T00Q(A450CG)
ASUS_Z007(ZC451CG)
ASUS_Z008(ZE550ML)
ASUS_Z00A(ZE551ML)
K00Z(ME175CG)
K012(FE170CG)

ImeiTool

currently implemented:

  • Imei repair for Intel SoC platform, specially for ASUS Intel devices.
  • Generic Imei repair for Qualcomm.
    WARNING: IMEI changing is illegal in most countries. Only use this function to restore the original IMEI !!!

AdbTool

  • Dump all the eMMC partitions
    extcsd, boot1, boot2, gp part and userarea partition
  • Read and write single partition for example factory, config, modemst1, modemst2, etc
    WARNING: dump result might be corrupted due to limitation of adb server and client in the windows environment, to resolve this please insert microSd into the device and use the “Dump to microSD” checkbox
  • Screencap to capture the device screen, might be useful for documentation or repair phone with faulty lcd
  • Clear or Disable PERM_WRITE_PROTECT bit in the csd field, to fix or avoid “cannot be wipe” problem
  • DragAndDrop handler for adb sideload
  • DragAndDrop handler for apk install

UFI Software version 1.2.0.327 updates

ADD: “Disable PERM_WRITE_PROTECT” function
Set CD_PERM_WP_DIS bit in the USER_WP (EXT_CSD[171]), this will disable the use of PERM_WRITE_PROTECT
so the host can not enable write protect to the eMMC.
ADD: Boot and Rpmb part size change while writing “extscd.bin”
ADD: “NAND Test” function for quick memory test of the eMMC content
This will write random bytes to boot1 and userarea partition and verify the content.
ADD: SUPPORT FILES revised(again), with Search capabilities and no IE dependencies :).
Fixed the “resume” bug which was causing file to be corrupted.
ADD: Implemented “Assign images” in the “User Partition” tab
Now you can write spesified/individual part image using raw dump (“userarea.bin”)
ADD: “Write CID” entry is now cached, so that you can use the cached entries next time you use “Write CID” function
ADD: Boot bus conditions config write
ADD: FFU files for KMI8U000MA-B605(4),KMKYL000VM-B603(18),KLMAG4FEJA-A002(18)
CHANGE: In Factory Image, CPU:MediaTek, RPMB part size will be set to be same as Boot part size by default.
BUGFIX: “Verify” files bug when download finished may cause the process not responding.
BUGFIX: Boot size change may cause ECC error in some devices(KMVTU000LM)
BUGFIX: Drag And Drop may not working in some environment
BUGFIX: MTK scatter load issues for some “non-official” scatter file.
BUGFIX: Workaround for some Samsung PIT files, was incorrectly mapped (eg. espresso)

Hi I am Asish, I like to do mobile repairing, I have a small mobile repair shop. I want to help all mobile repair technicians by providing premium files, schematics, tricks and tips for free.

Leave a Comment